BPWRX - 4080-TYPE TONER

  • MSDS: BPWRX
  • Manufacturer: WRITE CONNECTION INC
  • Product Name: 4080-TYPE TONER
  • National Stock Number: 6850-00N035974
Product Identification

Product ID:4080-TYPE TONER
MSDS Date:04/17/1991
FSC:6850
NIIN:00N035974
MSDS Number: BPWRX

Responsible Party
WRITE CONNECTION INC
9253 ETON AVE
CHATSWORTH, CA 91311
US

Emergency Phone: 800-325-8736

Info Phone: 800-325-8736

Cage: 1FG37

Contractor
WRITE CONNECTION INC
CHATSWORTH, CA 91311 US

Telephone: 800-325-8736

Cage: 1FG37

Ingredients

NON HAZARDOUS INGREDIENT

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMUM RESPIRATORY TRACT IRRITATION
MAY OCCUR, AS WITH EXPOSURE OF LARGE AMOUNTS OF ANY NON-TOXIC DUST.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR. EYE:FLUSH WITH PLENTY OF WATER FOR
AT LEAST 15 MINUTES. SKIN:WASH WITH WATER & SOAP. INGEST:CALL MD
IMMEDIATELY .

Fire Fighting

Flash Point:NONE
Extinguishing Media:DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard:AS WITH ALL COMBUSTIBLE MATERIALS, IN
FINELY DIVIDED STATE, EXTREMELY HIGH CONCENTRATIONS IN AIR MAY
CREATE AN EXPLOSIVE MIXTURE- (ELIMINATE ALL IGNIT SOURCES).

Accidental Release

Spill Release Procedures:VACUUM OR SWEEP UP WITH A SWEEPING COMPOUND
(TO MINIMIZE FORMATION OF DUST), PUT IN WASTE CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:NOT NORMALLY REQUIRED.
Protective Gloves:NOT NORMALLY REQUIRED.
Eye Protection:CHEMIAL WORKERS GOGGLES .
Other Protective Equipment:NOT NORMALLY REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:DO NOT INCINERATE, AVOID BREATHING
SMOKE.

Disposal

Waste Disposal Methods:NO SPECIAL PRECAUTIONS. NORMAL WASTE DISPOSAL.
DO NOT INCINERATE. DISPOSAL MUST BE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.